G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
Electronic Throttle Actuator: Testing and Inspection
Component Inspection
THROTTLE CONTROL MOTOR
1. Disconnect electric throttle control actuator harness connector.
2. Check resistance between terminals 3 and 6.
Resistance: Approximately 1 - 15 Ohms [at 25 °C (77 °F)]
3. If NG, replace electric throttle control actuator and go to next step.
4. Perform EC-88, "Throttle Valve Closed Position Learning". See: Testing and Inspection/Programming and Relearning/Throttle Valve Closed
Position Learning
5. Perform EC-89, "Idle Air Volume Learning". See: Testing and Inspection/Programming and Relearning/Idle Air Volume Learning