G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
Ignition Coil: Service and Repair
IGNITION COIL
Removal and Installation
REMOVAL
1. Remove engine cover with power tool. Refer to "INTAKE MANIFOLD COLLECTOR".
2. Remove air cleaner case and air duct (for ignition coil of left bank side). Refer to "AIR CLEANER AND AIR DUCT".
3. Move aside harness, harness bracket, and hoses located above ignition coil.
4. Disconnect harness connector from ignition coil.
5. Remove ignition coil.
CAUTION: Do not shock it.
INSTALLATION
Install in the reverse order of removal.