G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
-
When CAN communication operation is detected, it switches to CAN communication status.
-
When a state of the following switches changes, it switches to CAN communication state.
-
Key switch
-
Hazard switch
-
Door lock/unlock switch
-
Front door switch (driver side, passenger side)
-
Rear door switch (LH, RH)
-
Trunk lid opener switch
-
Combination switch (passing, lighting switch 1ST position, front fog lamp)
-
Key fob (lock/unlock signal)
-
Key cylinder switch
-
When control performed only by BCM is required by switch, it shifts to CAN communication inactive mode.
-
Status of combination switch reading function is changed.
SYSTEMS CONTROLLED BY BCM DIRECTLY
SYSTEMS CONTROLLED BY BCM AND IPDM E/R
SYSTEMS CONTROLLED BY BCM AND COMBINATION METER
SYSTEMS CONTROLLED BY BCM AND INTELLIGENT KEY UNIT