G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
9. Flip the new bracket over and mount it as shown in Figure 6d.
^
Torque nut to 17.6 - 26.5 Nm (1.8 - 2.7 kg-m, 13 - 20 ft-lb).
10. After installation of SAB kit on both front seats and BTS kit on the passenger front seat, reinstall the seats in reverse order.
^ Torque for seat mounting bolts: 49 Nm (5.0 kg-m, 36 ft-lb)
11. Go to "Final Steps After Installation of Side Air Bag and Belt Tension Sensor Connector Kits".
Final Steps After Installation of Side Air Bag/Belt Tensions Sensor
Final Steps After Installation of Side Air Bag and Belt Tensions Sensor Connector Kits
1. Connect the battery cables, positive cable first.
2. Reset the clock and the radio station presets.
3 Reset / Re-initialize power windows, power sunroof, ATC, etc. as needed.
^ Refer to Additional Service When Removing Battery Negative Terminal in the GI section of the appropriate Service Manual for details.
4. Connect CONSULT-II or C-III to the vehicle and check air bag codes.
^ Erase SIDE MODULE RH or LH [OPEN] (B1129 or B1134) DTCs and/or BELT TENSION SEN [UNIT FAIL] (B1019) DTC that may be stored in
Self Diagnosis Current or Self Diagnosis Past.