G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
11. Reinstall the connector mounting clip (see Figure 9).
12. Install 2 "mounting clip type" tie-wraps as shown in Figure 9.
13. Mount the SAB connector on the new bracket as shown in Figure 10.
NOTE:
Make sure a SAB connector kit is installed on both front seats.
14. Go to "Sedan - Belt Tension Sensor Connector Kit Installation".
Sedan: Belt Tensioner Sensor Connector Kit Installation
SEDAN: Belt Tension Sensor Connector Kit Installation (passenger seat only)
NOTE: