G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
8. Install the new BTS connector bracket to the seat frame as shown in Figure 7a and torque the bolts:
^ Bolt #1: 17.6 - 26.5 Nm (1.8 - 2.7 kg-m, 13 - 20 ft-lb).
^ Bolt #2: 2.4 - 4.6 Nm (0.24 - 0.47 kg-m, 21 - 41 in-lb).
9. Clip / snap the BTS connector onto the new bracket (see Figure 8a).
10. Install a tie-wrap (P/N 24216 - S5800) around the connector as shown in Figure 8a.
a. Route the tie-wrap through the hole in the bracket.
b. Position the tie-wrap so the excess end is not straight down.
c. Pull the tie-wrap tight.