G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
6. Tighten rear extension assembly mounting bolts to specified torque.
CAUTION: Do not reuse self-sealing bolt.
Rear extension assembly mounting bolt:
Tightening Torque: 52 Nm (53 kgf-m, 38 ft. lbs.)
Self-sealing bolt:
Tightening Torque: 61 Nm (62 kgf-m, 45 ft. lbs.)
7. Install rear engine mounting member. Refer to Removal and Installation.
8. Install oil pan to transmission case.
a. Install oil pan gasket to oil pan.
CAUTION:
^
Do not reuse oil pan gasket.
^
Install it in the direction to align hole positions.
^
Complete remove all moisture, oil and old gasket, etc. from oil pan gasket mounting surface.
b. Install oil pan (with oil pan gasket) to transmission case.
CAUTION:
^
Install it so that drain plug comes to the position as shown in the figure.
^
Be careful not to pinch harnesses.
^
Complete remove all moisture, oil and old gasket, etc. from oil pan mounting surface.