G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
Power Distribution Module: Service and Repair
Removal and Installation of IPDM E/R
REMOVAL
1. Remove battery. Refer to "Removal and Installation" in "Starting and Charging System (SC)" section.
2. Remove IPDM E/R cover A. While pushing pawl on backside of IPDM E/R cover B toward vehicle front to unlock, lift up IPDM E/R.
3. While pushing tabs on right and left side of IPDM E/R, remove IPDM E/R cover B from IPDM E/R.
4. Remove harness connector from IPDM E/R.
INSTALLATION
Installation is the reverse order of removal.