G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
Wheel Bearing: Testing and Inspection
Rear
WHEEL HUB
On-Vehicle Inspection and Service
Make sure the mounting conditions (looseness, back lash) of each component and component status (wear, damage) are normal.
WHEEL BEARING INSPECTION
^
Move wheel hub in the axial direction by hand. Make sure there is no looseness of wheel bearing.
Axial end play : 0.05 mm (0.002 inch) or less
^
Rotate wheel hub and make sure there is no unusual noise or other irregular conditions. If there are any irregular conditions, replace wheel
bearings.