G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
13. Install engine mounting insulator (rear). Refer to Removal and Installation.
14. Install rear engine mounting member. Refer to Removal and Installation.
15. Install rear propeller shaft. Refer to Removal and Installation.
16. Install control rod. Refer to Control Rod Removal and Installation.
17. Install exhaust front tube and center muffler. Refer to Removal and Installation.
18. Install drain plug in oil pan.
CAUTION: Do not reuse self-sealing bolt.
Tightening Torque: 34 Nm (3.5 kgf-m, 25 ft. lbs.)
19. Pour ATF into transmission assembly. Refer to Changing A/T Fluid.