G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
Shifter A/T: Adjustments
Adjustment of A/T Position.
2WD MODELS
1. Loosen nut of pivot pin.
2. Place PNP switch and selector lever in P position.
3. While pressing lower lever toward rear of vehicle (in P position direction), tighten nut to specified torque.
AWD MODELS
1. Loosen nut of control rod.
2. Place PNP switch and selector lever in P position.
3. While pressing lower lever toward rear of vehicle (in P position direction), tighten nut to specified torque. Refer to CONTROL DEVICE
COMPONENTS (AWD MODELS).
CAUTION: Do not push the bracket.