G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
Drive/Propeller Shaft: Service and Repair
Removal and Installation
REAR PROPELLER SHAFT
NOTE:
^
The joint cannot be disassembled.
^
The center bearing can be disassembled. Refer to Disassembly and Assembly of Center Bearing.
Removal and Installation
REMOVAL
1. Move A/T selector lever to N position or set M/T shift lever to neutral position.
2. Release parking brake.
3. Remove the center muffler with power tool. Refer to Removal and Installation.
4. Loosen mounting nuts of center bearing mounting brackets with power tool.
CAUTION: Tighten mounting nuts temporarily.
5. Put matching marks on propeller shaft flange yoke with final drive companion flange.
CAUTION: For matching mark, use paint. Do not damage propeller shaft flange yoke and companion flange.
6. Remove propeller shaft fixing bolts and nuts.
7. Remove center bearing mounting bracket fixing nuts.
8. Remove propeller shaft.
INSPECTION