G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
Back Window Glass: Service and Repair
Rear Window Molding
REAR WINDOW MOLDING
Removal and Installation
REMOVAL
Remove rear window molding. Refer to "REAR WINDOW GLASS AND MOLDING".
NOTE: Apply a strip of protective tape along the contour of rear window glass (molding) to prevent paint surface from being damaged.
INSTALLATION
Install rear window molding. Refer to "REAR WINDOW GLASS AND MOLDING".
NOTE:
-
Clean adhesive portion of rear window glass and around circumference with white gasoline.
-
Apply dam rubber to upper and lower surfaces of glass.
-
Attach rear window molding to side face of glass.
-
Rear window molding should not overlap on the surface of rear window glass.