G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
Windshield: Service and Repair
Removal and Installation
WINDSHIELD GLASS
Removal and Installation
REMOVAL
1. Remove the front pillar garnish. Refer to "BODY SIDE TRIM".
2. Partially remove the headlining (front edge). Refer to "HEADLINING".
3. Remove the front wiper arms. Refer to "Removal and Installation of Front Wiper Arms, Adjustment of Wiper Arms Stop Location".
4. Remove the roof side molding.
5. Apply protective tape around the windshield glass to protect the painted surface from damage.
6. Cut the moldings with the cutting knife.
After removing moldings using pliers, remove glass using piano wire or power cutting tool and an inflatable pump bag.
-
If a windshield glass is to be reused, mark the body and the glass with mating marks.
WARNING: When cutting the glass from the vehicle, always wear safety glasses and heavy gloves to help prevent glass splinters from entering
your eyes or cutting your hands.