G35x Sedan AWD V6-3.5L (VQ35HR) (2007)
4. Remove front door sash molding (1) connection between door panel and molding from glass run side, using a remover tool (A).
5. Remove front door sash molding (1).
Installation
Install in the reverse order of removal.
REAR DOOR SASH MOLDING
Removal
1. Remove rear door weather strip.
2. Release roof portion of glass run.
3. Remove rear door sash molding (1) connection between door panel and molding from glass run side, using a remover tool (A).
4. Remove rear door sash molding (front) (1).
5. Release rear door sash molding connection between rear door panel and molding (1), using a remover tool (A), and take off double-faced adhesive
tape.
6. Remove rear door sash molding (rear) (1).
Installation
Install in the reverse order of removal.
CAUTION:
-
l Do not let air between contact surfaces when installing.
-
l To secure contact, do not wash vehicle within 24 hours after installation.