G35x Sedan AWD V6-3.5L (VQ35HR) (2007)
Exploded View IP-11 (Part 2)
Exploded View
AUTOMATIC DRIVE POSITIONER CONTROL UNIT
Exploded View
Refer to Exploded View IP-11.
Removal and Installation
REMOVAL
CAUTION: When removing and installing, use shop cloths to protect parts from damage.
1. Remove the battery negative terminal.
2. Remove the instrument driver lower panel.
3. Remove the screws (A).
4. Remove automatic drive positioner control unit (1).
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
Clamp the harness in position.
NOTE: After installing the driver seat, perform additional service when removing battery negative terminal. See: Testing and Inspection/Programming
and Relearning/Additional Service When Removing Battery Negative Terminal Refer to ADP-8, "ADDITIONAL SERVICE WHEN REMOVING
BATTERY NEGATIVE TERMINAL : Description". See: Testing and Inspection/Programming and Relearning/Additional Service When Removing
Battery Negative Terminal