G35x Sedan AWD V6-3.5L (VQ35HR) (2007)
8.
Pull the original seat heater harness from underneath the seat cushion and disconnect the connectors.
9.
Connect the new seat heater wire harness in- between the original seat heater harness connectors.
10.
Bundle the wire harness together and wrap electrical tape around the connectors 4-5 times.
NOTE:
^
Driver's seat will have 3 connectors to bundle.
^
Passenger seat will have 2 connectors to bundle.
11.
Place the bundled seat heater wire harness under the seat.
12.
Hook the carpet tabs to the S spring located under the seat cushion.
13.
Install the original 4 bolts and plastic slide covers. Torque seat anchor bolts to 49.0 N.m (5.0 Kg-m 36 ft.lb).
14.
Repeat steps 6 through 13 for the passenger seat.
15.
Reconnect battery.
16.
Reprogram radio.
17.
Check to make sure the incident has been resolved.