G35x Sedan AWD V6-3.5L (VQ35HR) (2007)
CAUTION: Remove the floor trim.
ADJUSTMENT
Brake Pedal Height
1. Disconnect the harness connector from ASCD cancel switch and stop lamp switch.
2. Turn the stop lamp switch 45° counterclockwise.
3. Loosen ASCD cancel switch lock nut. Turn ASCD cancel switch counterclockwise.
4. Loosen the input rod lock nut (1). Adjust the brake pedal to the specification. Tighten the input lock nut to the specification. Refer to Exploded
View BR-32, Exploded View BR-34.
CAUTION: The threaded end of the input rod must project to the inner side (L) of the clevis (3).
ASCD Cancel Switch and Stop Lamp Switch
1. Disconnect the harness connector from ASCD cancel switch and stop lamp switch.
2. Turn the stop lamp switch 45° counterclockwise.
3. Loosen ASCD cancel switch lock nut. Turn ASCD cancel switch counterclockwise.
4. Press the brake pedal pad slightly. Release the brake pedal. Turn ASCD cancel switch (1) until ASCD cancel switch threaded end hits to the
stopper rubber (2) clockwise.
CAUTION: Never press-fit the input rod.
5. Tighten ASCD cancel switch lock nut (3) to the specification. Refer to Exploded View BR-19.
CAUTION: The clearance (C1) between the stopper rubber and the ASCD cancel switch threaded end must be the specified value.
6. Press-fit the stop lamp switch (4) until the stop lamp switch hits the stopper rubber 45° clockwise while pulling the brake pedal pad slightly.