G35x Sedan AWD V6-3.5L (VQ35HR) (2007)
Brake Pedal Assy: Service and Repair
BRAKE PEDAL
Exploded View BR-19
Removal and Installation
REMOVAL
1. Remove instrument driver lower panel.
2. Remove steering column assembly.
3. Disconnect the stop lamp switch and ASCD cancel switch harness connectors.
4. Turn the stop lamp switch counterclockwise to remove the stop lamp switch.
5. Loosen the lock nut for the ASCD cancel switch and remove the ASCD cancel switch.
6. Remove snap pin and clevis pin from clevis of brake booster.
7. Remove the cowl top.
8. Remove the instrument panel.
9. Slide the steering member rearward.
10. Remove the brake pedal assembly.
INSTALLATION
Note the following, and installation in the reverse order of removal.
^
Apply the multi-purpose grease to the clevis pin and the mating faces. (Not necessary if grease has been already applied)
NOTE: The clevis pin may be inserted in either direction.
Inspection and Adjustment
INSPECTION AFTER REMOVAL