G35x Sedan AWD V6-3.5L (VQ35HR) (2007)
5. Remove mounting bolt (A) from low-pressure flexible hose bracket (1).
6. Disconnect the one-touch joint between low-pressure pipe 1 (1) and low-pressure pipe 2 (2) with disconnector (A) (SST: 9253089916).
CAUTION: Cap or wrap the joint of low-pressure pipe 1 and 2 with suitable material such as vinyl tape to avoid the entry of air.
7. Disconnect the one-touch joint between low-pressure pipe 2 (1) and low-pressure flexible hose (2) with disconnector (A) (SST: 9253089916).
CAUTION: Cap or wrap the joint of low-pressure pipe 2 and low-pressure flexible hose with suitable material such as vinyl tape to avoid
the entry of air.
8. Remove the low-pressure pipe 2 clip (B).
9. Remove low-pressure pipe 2.
10. Remove mounting nut (A) from low-pressure flexible hose (1).
CAUTION: Cap or wrap the joint of low-pressure flexible hose with suitable material such as vinyl tape to avoid the entry of air.
11. Remove low-pressure flexible hose.
INSTALLATION
Installation is basically the reverse order of removal.
CAUTION:
-
Replace O-rings of low-pressure flexible hose and low-pressure pipe 2 with new ones, and then apply compressor oil to it when installing
it.
-
Female-side piping connection is thin and easy to deform. Slowly insert the male-side piping straight in axial direction.
-
Insert piping securely until a click is heard.