G35x Sedan AWD V6-3.5L (VQ35HR) (2007)
4. Remove mounting bolt (A) from high-pressure flexible hose bracket (1).
5. Disconnect the one-touch joint between high-pressure flexible hose (1) and condenser pipe assembly (2) with disconnector (A) (SST:
9253089912).
CAUTION: Cap or wrap the joint of high-pressure flexible hose and condenser pipe assembly with suitable material such as vinyl tape to
avoid the entry of air.
6. Remove mounting nut (A) from high-pressure flexible hose (1), and then remove high-pressure flexible hose.
CAUTION: Cap or wrap the joint of compressor and high-pressure flexible hose with suitable material such as vinyl tape to avoid the
entry of air.
INSTALLATION
Installation is basically the reverse order of removal.
CAUTION:
-
Replace O-rings of high-pressure flexible hose with new ones, and then apply compressor oil to it when installing it.
-
Female-side piping connection is thin and easy to deform. Slowly insert the male-side piping straight in axial direction.
-
Insert piping securely until a click is heard.
-
After piping connection is completed, pull male-side piping by hand to make sure that connection does not come loose.
-
When recharging refrigerant, check for leaks.