G35x Sedan AWD V6-3.5L (VQ35HR) (2007)
CAUTION: Be careful not to damage it.
3. After fixing tabs are disengaged, slide fuel level sensor unit (1) out in direction shown by the arrow.
A: Pull
CAUTION: Do not disassemble fuel filter and fuel pump assembly.
Assembly
CAUTION: Sub fuel level sensor unit cannot be disassembled and should be replaced as a unit.
1. Check for damage of fuel level sensor unit installation position on the side of fuel filter and fuel pump assembly.
2. Slide fuel level sensor unit until it aligns to installation groove, then insert it until it stops.
-
After inserting, apply force in reverse direction (removal direction) to ensure it cannot be pulled out.
3. Connect the black (A) and white (B) harnesses so that they are in the positions shown in the figure.
-
Securely insert harness connector until it stops.