G35x Sedan AWD V6-3.5L (VQ35HR) (2007)
Headlamp Alignment Sensor: Removal and Replacement
HEIGHT SENSOR
Exploded View EXL-197
Exploded View
Removal and Installation
REMOVAL
1. Remove the height sensor mounting nut.
2. Remove the height sensor lever link bracket mounting bolt.
3. Disconnect the height sensor connector.
4. Disconnect the height sensor.
INSTALLATION
Install in the reverse order of removal.
CAUTION: Perform the levelizer adjustment when removing the height sensor. Refer to EXL-8, "LEVELIZER ADJUSTMENT : Special
Repair Requirement". See: Headlamp/Adjustments/Levelizer Adjustment