infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Wheels and Tires|Service and Repair > < Tires - Mounting Information/Precautions|Page 1763
Page 3
background image

^ Standard tire pressure gauge readings increase about 1.0 psi for every 2,200 ft of altitude increase above sea level (up to 10,000 ft). See Graph 3.

^ For example if the TIRE AND LOADING INFORMATION label reads 33 psi then at an elevation of 5,280 ft, the cold inflation pressure using a

gauge should be increased 2.5 psi to 35.5 psi."

NOTE:

In the above example, C-III, Signal Tech II, or the vehicle information display (if equipped) would show a tire pressure of 33 psi. If needed use C-III or
Signal Tech-II to confirm tire pressure.

NOTE:

^ After correcting the tire pressure the vehicle may need to be driven at speeds above 16 mph to activate the TPMS and turn off the low tire pressure

warning light.

^ If pressure compensation for temperature is used, the pressure should be re-checked and adjusted at a later time when the tires are cold.

^ If after turning the ignition ON, the TPMS light flashes for one minute and then turns solid, refer to ITB10-023 or ITB09-050.

Wheels and Tires|Service and Repair > < Tires - Mounting Information/Precautions|Page 1763