G35x Sedan AWD V6-3.5L (VQ35HR) (2007)
/Page-440002.png)
^
When installing balance weight (1) to road wheels, set it into the grooved area (A) on the inner wall of the road wheel as shown in the figure so
that the balance weight center (B) is aligned with the tire balance machine indication position (angle)(C).
CAUTION:
^
Always use genuine NISSAN adhesion balance weights.
^
Balance weights are non-reusable; always replace with new ones.
^
Do not install more than three sheets of balance weight.
c. If calculated balance weight value exceeds 50 g (1.76 oz), install two balance weight sheets in line with each other as shown in the figure.
CAUTION: Do not install one balance weight sheet on top another.
3. Start tire balance machine again.
4. Install drive-in balance weight on inner side of road wheel in the tire balance machine indication position (angle).
CAUTION: Do not install more than two balance weight.
5. Start tire balance machine. Make sure that inner and outer residual unbalance values are 5 g (0.17 oz) each or below.
