G35x Sedan AWD V6-3.5L (VQ35HR) (2007)
CLAIMS INFORMATION
SERVICE PROCEDURE
1. Connect C-III to the vehicle to begin the ECM reprogramming procedure.
2. When you get to the ECM Reprogramming screen shown in Figure 1, confirm this bulletin applies as follows:
A. On your C-III screen, look at the Part Number column (see Figure 1):
^
If this column is blank (no part number listed), this bulletin does not apply. Close C-III and refer to ASIST for further diagnostic information.
^
If a Part Number is listed, write it on the Repair Order.