G35x Sedan AWD V6-3.5L (VQ35HR) (2007)
^
Do not bump or drop fuel injector.
^
Do not disassemble fuel injector.
12. Remove fuel sub-tube and fuel damper, if necessary.
INSTALLATION
1. Install fuel damper (4) as follows:
a. Install new O-ring (2) to fuel tube (1) as shown. When handling new O-ring, be careful of the following caution:
CAUTION:
^
Handle O-ring with bare hands. Do not wear gloves.
^
Lubricate O-ring with new engine oil.
^
Do not clean O-ring with solvent.
^
Make sure that O-ring and its mating part are free of foreign material.
^
When installing O-ring, be careful not to scratch it with tool or fingernails. Also be careful not to twist or stretch O-ring. If O-ring
was stretched while it was being attached, do not insert it quickly into fuel tube.
^
Insert new O-ring straight into fuel tube. Do not twist it.
b. Install spacer (3) to fuel damper.
c. Insert fuel damper straight into fuel tube.
CAUTION:
^
Insert straight, making sure that the axis is lined up.
^
Do not pressure-fit with excessive force.
Reference value: 130 N (13.3 kg, 29.2 lb)
^
Insert fuel damper until (B) is touching (A) of fuel tube.
d. Tighten bolts evenly in turn.
^
After tightening bolts, make sure that there is no gap between fuel damper cap (5) and fuel tube.
2. Install fuel sub-tube.
^
When handling new O-rings, be careful of the following caution:
CAUTION:
^
Handle O-ring with bare hands. Do not wear gloves.
^
Lubricate O-ring with new engine oil.
^
Do not clean O-ring with solvent.
^
Make sure that O-ring and its mating part are free of foreign material.
^
When installing O-ring, be careful not to scratch it with tool or fingernails. Also be careful not to twist or stretch O-ring. If O-ring
was stretched while it was being attached, do not insert it quickly into fuel tube.
^
Insert new O-ring straight into fuel tube. Do not decenter or twist it.
^
Insert fuel sub-tube straight into fuel tube.