G35x Sedan AWD V6-3.5L (VQ35HR) (2007)
1. Apply liquid gasket to the position shown in the figure with the following procedure:
A: Liquid gasket application point
b. 4 mm (0.16 in)
c. 2.5 - 3.5 mm (0.098 - 0.138 in)
d. 5 mm (0.20 in)
F: View C
g. 10 mm (0.39 in)
I: End surface of camshaft bracket (No.1)
a. Refer to figure (E) to apply liquid gasket to joint part of camshaft bracket (No. 1) (1) and cylinder head.
b. Refer to figure (H) to apply liquid gasket in 90° to figure. Use Genuine RTV silicone sealant or equivalent. Refer to GI-15, "Recommended
Chemical Products and Sealants".
2. Install rocker cover gasket to rocker cover.
3. Install rocker cover.
^
Check if rocker cover gasket is not dropped from the installation groove of rocker cover.
4. Tighten bolts in two steps separately in numerical order as shown in the figure.
1st step: 2.0 Nm (0.2 kg-m, 18 in-lb)
2nd step: 8.3 Nm (0.85 kg-m, 73 in-lb)
5. Install in the reverse order of removal after this step.