G35x Sedan AWD V6-3.5L (VQ35HR) (2007)
-
To keep the connecting portion clean and to avoid damage and foreign materials, cover them completely with plastic bags (A) or something
similar.
8. Remove main fuel level sensor unit, fuel filter and fuel pump assembly, and sub fuel level sensor unit as follows:
CAUTION:
-
Do not bend float arm during removal.
-
Avoid impacts such as falling when handling components.
a. Removal of main fuel level sensor unit, fuel filter and fuel pump assembly:
i.
Remove retainer.
ii. Raise main fuel level sensor unit, fuel filter and fuel pump assembly, and using snap ring pliers (A), remove fuel hose connector (1).
2: Fuel hose
CAUTION: Be careful not to damage fuel hose connector by expanding them excessively.
b. Removal of sub fuel level sensor unit:
i.
Remove retainer.
ii. Raise and release sub fuel level sensor unit to remove.
INSTALLATION
Note to the following, and install in the reverse order of removal.
Fuel hose