infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Vehicle Lifting|Service and Repair|Page 6279 > < Front Axle|Page 6274
Page 1
background image

Vehicle Lifting: Service and Repair

Garage Jack and Safety Stand and 2-Pole Lift

WARNING:

-

Park the vehicle on a level surface when using the jack. Make sure to avoid damaging pipes, tubes, etc. under the vehicle.

-

Never get under the vehicle while it is supported only by the jack. Always use safety stands when you have to get under the vehicle.

-

Place wheel chocks at both front and back of the wheels on the ground.

-

When lifting the vehicle, open the lift arms as wide as possible and ensure that the front and rear of the vehicle are well balanced.

-

When setting the lift arm, do not allow the arm to contact the brake tubes, brake cable, fuel lines and sill spoiler.

CAUTION:  There is canister just behind Garage jack point rear. Jack up be carefully.

Board-On Lift

CAUTION:  Make sure vehicle is empty when lifting.

-

The board-on lift attachment (A) set at front end of vehicle should be set on the front of the sill under the front door opening.

-

Position attachments at front and rear ends of board-on lift.

<=: Vehicle front

Vehicle Lifting|Service and Repair|Page 6279 > < Front Axle|Page 6274