G35x Sedan AWD V6-3.5L (VQ35HR) (2007)
12. Connect revolution sensor connector (A).
13. Engage revolution sensor harness with terminal clip (<=).
14. Install magnets (1) in oil pan.
15. Install oil pan gasket to oil pan.
CAUTION:
^
Do not reuse oil pan gasket.
^
Install it in the direction to align hole positions.
^
Complete remove all moisture, oil and old gasket, etc. from oil pan gasket mounting surface.
16. Install oil pan (2) (with oil pan gasket) and clips (1) to transmission case.
<=: Vehicle front
<=: Oil pan mounting bolt
CAUTION:
^
Install it so that drain plug (3) comes to the position as shown in the figure.
^
Be careful not to pinch harnesses.
^
Completely remove all moisture, oil and old gasket, etc. from oil pan mounting surface.
17. Tighten oil pan mounting bolts to the specified torque in numerical order shown in the figure after temporarily tightening them. Tighten oil pan
mounting bolts to the specified torque.
<=: Vehicle front
CAUTION: Do not reuse oil pan mounting bolts.
18. Install drain plug to oil pan. Tighten drain plug to the specified torque.
CAUTION: Do not reuse drain plug gasket.