G35x Sedan AWD V6-3.5L (VQ35HR) (2007)
NOTE: Circular clip installation position: Final drive side
7. Remove propeller shaft.
8. Measure the total preload with the preload gauge (A) [SST: ST3127S000 (J-25765-A)].
NOTE: Record the preload measurement.
9. Put matching mark (B) on the end of the drive pinion. The matching mark (B) should be in line with the matching mark (A) on companion flange
(1).
CAUTION: For matching mark, use paint. Never damage companion flange and drive pinion.
NOTE: The matching mark (A) on the final drive companion flange (1) indicates the maximum vertical runout position.
10. Remove drive pinion lock nut using the flange wrench.