G35x Sedan AWD V6-3.5L (VQ35HR) (2007)
1. Measure propeller shaft runout at several points by rotating final drive companion flange with hands.
2. If runout still exceeds specifications, separate propeller shaft at final drive companion flange; then rotate companion flange 90, 180, 270 degrees
and install propeller shaft.
3. Check runout again. If runout still exceeds specifications, replace propeller shaft assembly
4. Check the vibration by driving vehicle.
RUNOUT MEASURING POINT
^
Propeller shaft runout measuring point (Point "[triangle]").
<=: Vehicle front
Dimension
A: 192 mm (7.56 in)
B: 172 mm (6.77 in)
C: 170 mm (6.69 in)
3S80A-R
ON-VEHICLE MAINTENANCE
REAR PROPELLER SHAFT
Inspection
NOISE
^
Check the propeller shaft tube surface for dents or cracks. If damaged, replace propeller shaft assembly.
^
If center bearing is noisy or damaged, replace propeller shaft assembly
VIBRATION
^
If vibration is present at high speed, inspect propeller shaft runout first.