G37 Convertible V6-3.7L (VQ37VHR) (2010)
Power Trunk / Liftgate Lock Actuator: Service and Repair
Removal and Installation
TRUNK LID LOCK
TRUNK LID LOCK : Removal and Installation
REMOVAL
1. Remove trunk lid finisher. See: Trunk / Liftgate Interior Trim Panel/Service and Repair/Trunk Lid Trim/Removal and Installation.
2. Remove trunk lid emergency opener lever.
3. Disconnect trunk lid opener cable.
4. Disconnect connector from trunk lid lock assembly.
5. Remove mounting bolts, and remove trunk lid lock assembly.
INSTALLATION
Install in the reverse order of removal.
NOTE:
-
After installing, perform trunk lid fitting adjustment. See: Adjustments/Trunk Lid Assembly.
-
After installing, check the operation.