G37 Convertible V6-3.7L (VQ37VHR) (2010)
Is the inspection result normal?
YES - Replace driver seat control unit. See: Relays and Modules - Body and Frame/Power Seat Control Module/Service and Repair/Driver Seat
Control Unit/Removal and Installation
NO - Repair or replace harness.
3.CHECK FORWARD SWITCH GROUND CIRCUIT
Check continuity between forward switch harness connector and ground.
Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace harness.
4.CHECK FORWARD SWITCH
Check forward switch. See: Driver Side/Component Inspection.
Is the inspection result normal?
YES - GO TO 5.
NO - Replace forward switch. See: Seats/Service and Repair/Front Seat/Exploded View.
5.CHECK INTERMITTENT INCIDENT
Check intermittent incident. See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Intermittent Incident.
- INSPECTION END
Component Inspection
FORWARD SWITCH
DRIVER SIDE : Component Inspection
1.CHECK FORWARD SWITCH
1. Turn ignition switch OFF.
2. Disconnect forward switch connector.
3. Check continuity between forward switch terminals.
Is the inspection result normal?
YES - INSPECTION END
NO - Replace forward switch. See: Seats/Service and Repair/Front Seat/Exploded View.
Component Function Check
FORWARD SWITCH
PASSENGER SIDE : Component Function Check
1.CHECK FUNCTION
Check that power walk-in function does not activate when seatback is folded up.
Is the inspection result normal?
YES - Forward switch function is OK.
NO - See: Passenger Side/Diagnosis Procedure.
Diagnosis Procedure
FORWARD SWITCH
PASSENGER SIDE : Description