G37 Convertible V6-3.7L (VQ37VHR) (2010)
Braking Sensor/Switch: Service and Repair
Removal and Installation
BRAKE PEDAL STROKE SENSOR
Removal and Installation
REMOVAL
1. Remove the instrument panel lower cover LH. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Installation/A/T Models(A/T models) or See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Installation/M/T Models(M/T models).
2. Disconnect the brake pedal stroke sensor connector.
3. Remove the screws (A).
4. Remove the brake pedal stroke sensor (1).
INSTALLATION
Install in the reverse order of removal.