G37 Convertible V6-3.7L (VQ37VHR) (2010)
Steering Angle Sensor: Service and Repair
Removal and Installation
Base Audio
STEERING ANGLE SENSOR
Removal and Installation
REMOVAL
1. Remove spiral cable.
2. Remove steering angle sensor from spiral cable.
INSTALLATION
Install in the reverse order of removal.
Without Navigation
STEERING ANGLE SENSOR
Removal and Installation
REMOVAL
1. Remove spiral cable.
2. Remove steering angle sensor from spiral cable.
INSTALLATION
Install in the reverse order of removal.
With Navigation
STEERING ANGLE SENSOR
Removal and Installation
REMOVAL
1. Remove spiral cable.
2. Remove steering angle sensor from spiral cable.
INSTALLATION
Install in the reverse order of removal.
VDC/TCS/ABS
STEERING ANGLE SENSOR
Removal and Installation
REMOVAL
1. Remove spiral cable assembly. See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair/Exploded View.
2. Remove steering angle sensor from spiral cable assembly.
INSTALLATION
Note the following, and install in the reverse order of removal.
-
Never reuse steering angle sensor.
-
After work, make sure to adjust neutral position of steering angle sensor. See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Testing and Inspection/Programming and Relearning/Adjustment of Steering Angle Sensor Neutral Position/Description.