G37 Convertible V6-3.7L (VQ37VHR) (2010)
1. Apply recommended grease to oil seal lips (1). Apply recommended fluid to around oil seal. Install oil seal to body assembly using a drift
(commercial service tool).
CAUTION:
-
Never reuse the oil seal.
-
Fix oil pump with a vise if necessary.
-
Use copper plates when fixing with a vise.
2. Apply recommended fluid to drive shaft, and press drive shaft into body assembly, then install snap ring.
CAUTION:
Never reuse the snap ring.
3. Apply recommended fluid to O-ring, and install O-ring into body assembly.
CAUTION:
Never reuse the O-ring.
4. Install side plate to body assembly.
5. Install dowel pin (1) into dowel pin hole (A), and install cam ring