G37 Coupe V6-3.7L (VQ37VHR) (2008)
Brake Booster Vacuum Sensor: Service and Repair
BRAKE BOOSTER PRESSURE SENSOR
BR-36 Exploded View
Removal and Installation
REMOVAL
1. Remove master cylinder cover.
2. Remove brake booster pressure sensor.
3. Remove vacuum hose.
INSTALLATION
Note the following, installation is the reverse order of removal.
CAUTION:
^
Insert vacuum hose at least 25 mm (0.98 in) (A).
^
Never use lubricating oil during assembly.
^
Face the marking side vehicle front when assembling (brake booster side).
^
Face the marking side connector when assembling (brake booster pressure sensor side).
Inspection
INSPECTION AFTER REMOVAL
^
Check for correct assembly, damage and deterioration.
^
Check for brake booster pressure sensor. Refer to EC-352, "Component Inspection".