G37 Sedan V6-3.7L (VQ37VHR) (2010)
Braking Sensor/Switch: Service and Repair
Removal and Installation
BRAKE PEDAL STROKE SENSOR
Removal and Installation
REMOVAL
1. Remove the driver instrument panel (lower). Refer to See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Installation/A/T Models.
2. Disconnect the brake pedal stroke sensor connector (A).
3. Remove the screws.
4. Remove the brake pedal stroke sensor (1).
INSTALLATION
Install in the reverse order of removal.