G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
c). Tighten the tap TIGHT with finger pressure.
2. Inspect the tap to ensure correct installation.
3. Tap the wire from the Impact Sensor.
a). Remove tap from non-pierce side.
b). Remove protective stub from wire (new wire only).
c). Insert the wire through the non-pierce side opening.
d). Spread the individual strands into a fan Shape.
e). Insert wire into the tap body and ensure that it is all the way in.
f). Tighten the tap TIGHT with finger pressure.