G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
Ign Off Interlock Door Unlock Function Does Not Operate
IGN OFF INTERLOCK DOOR UNLOCK FUNCTION DOES NOT OPERATE
Description
NOTE:
Before performing the diagnosis in the following procedure, check the operation condition. Refer to See: Description and Operation/System
Description.
IGN OFF INTERLOCK DOOR UNLOCK FUNCTION DOES NOT OPERATE
Diagnosis Procedure
1.CHECK POWER DOOR LOCK OPERATION
Check power door lock operation.
Does door lock/unlock with door lock and unlock switch?
YES - GO TO 2.
NO - Refer to See: Door Does Not Lock/Unlock With Door Lock And Unlock Switch/All Door.
2.CHECK "AUTOMATIC LOCK/UNLOCK SELECT" SETTING IN "WORK SUPPORT"
Check "AUTOMATIC LOCK/UNLOCK SELECT" in "WORK SUPPORT". Refer to See: Scan Tool Testing and Procedures/Door Lock.
Is the inspection result normal?
YES - GO TO 3.
NO - Set "AUTOMATIC LOCK/UNLOCK SELECT" in "WORK SUPPORT".
3.CHECK "AUTOMATIC DOOR UNLOCK SELECT" SETTING IN "WORK SUPPORT"
Check "AUTOMATIC DOOR UNLOCK SELECT" in "WORK SUPPORT". Refer to See: Scan Tool Testing and Procedures/Door Lock.
Is the inspection result normal?
YES - GO TO 4.
NO - Set "AUTOMATIC DOOR UNLOCK SELECT" in "WORK SUPPORT".
4.CHECK BCM
Check BCM for DTC. Refer to See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests
and Associated Procedures.
Is the inspection result normal?
YES - GO TO 5.
NO - Repair or replace the malfunctioning parts.
5.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Refer to See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Intermittent Incident.
NO - GO TO 1.
Auto Door Lock Operation Does Not Operate
AUTO DOOR LOCK OPERATION DOES NOT OPERATE
Description
NOTE:
Before performing the diagnosis in the following procedure, check the operation condition. Refer to See: Description and Operation/System
Description.
AUTO DOOR LOCK OPERATION DOES NOT OPERATE
Description
NOTE:
Before performing the diagnosis in the following procedure, check the operation condition. Refer to See: Description and Operation/System
Description.
AUTO DOOR LOCK OPERATION DOES NOT OPERATE
Diagnosis Procedure
1.CHECK "AUTO LOCK SET" SETTING IN "WORK SUPPORT"
Check "AUTO LOCK SET" setting in "WORK SUPPORT". Refer to See: Scan Tool Testing and Procedures/Intelligent Key.
Is the inspection result normal?