G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
Is the inspection result normal?
YES - GO TO 3.
NO - Repair or replace harness.
3.CHECK GROUND CIRCUIT
Check continuity between BCM harness connector and ground.
Is the inspection result normal?
YES - INSPECTION END
NO - Repair or replace harness.
Component Function Check
DOOR LOCK AND UNLOCK SWITCH
DRIVER SIDE : Component Function Check
1.CHECK FUNCTION
Check ("CDL LOCK SW ", "CDL UNLOCK SW") in "Data Monitor" mode using CONSULT-III.
Is the inspection result normal?
YES - Door lock and unlock switch is OK.
NO - Refer to See: Component Tests and General Diagnostics/Door Lock And Unlock Switch/Driver Side/Diagnosis Procedure.
Diagnosis Procedure
DOOR LOCK AND UNLOCK SWITCH
DRIVER SIDE : Description
Transmits door lock/unlock operation to BCM.
DOOR LOCK AND UNLOCK SWITCH
DRIVER SIDE : Diagnosis Procedure
1.CHECK POWER WINDOW SWITCH
1. Turn ignition switch ON.
2. Check power window operation.
Does power window (driver side) operate?
YES - Replace power window main switch. Refer to See: Sensors and Switches/Sensors and Switches - Windows and Glass/Power Window
Switch/Service and Repair.
NO - Refer to See: Windows and Glass/Windows/Testing and Inspection/Symptom Related Diagnostic Procedures/Driver Side Power Window
Alone Does Not Operate.
Component Function Check