G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
Memory Positioning Module: Service and Repair
Automatic Drive Positioner Control Unit
Exploded View
AUTOMATIC DRIVE POSITIONER CONTROL UNIT
Exploded View
Refer to See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Exploded View.
Removal And Installation
AUTOMATIC DRIVE POSITIONER CONTROL UNIT
Removal and Installation
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1. Remove the battery negative terminal.
2. Remove the instrument driver lower panel. Refer to See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal And
Installation.
3. Remove the screws (A).
4. Remove automatic drive positioner control unit (1).
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Always clamp the harness to the right place.