G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
Trunk / Liftgate Weatherstrip: Service and Repair
Removal And Installation
TRUNK LID
TRUNK LID WEATHERSTRIP : Removal and Installation
REMOVAL
Pull up and remove engagement with body from weather-strip joint.
CAUTION:
After removal, never pull strongly on the weather-strip.
INSTALLATION
1. Align the weather-strip seam (upper) with mark of the body panel and weather-strip onto the vehicle.
2. Align the weather-strip seem (lower) with center of the striker and weather-strip onto the vehicle.
3. After installation, pull the weather-strip gently to ensure that there is no loose section.
NOTE:
Check that the weather-strip fits tightly at each corner and trunk rear plate.