G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
CAUTION:
Never get fingers caught in the piston.
6. Remove piston seal from cylinder body using suitable tool.
CAUTION:
Be careful not to damage a cylinder inner wall.
7. Remove bleeder valve and cap.
ASSEMBLY
1. Install bleeder valve and cap.
2. Apply polyglycol ether based lubricant to piston seal (1), and install them to cylinder body.
CAUTION:
Never reuse piston seal.
3. Apply rubber grease to piston boot (1). Cover the piston (2) end with the piston boot, and then install cylinder side lip on the piston boot securely
into the groove on cylinder body.
CAUTION:
Never reuse piston boot.