G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
5. Place the top of cross spring (1) over the upper pad pin (2), press in the cross spring, install lower pad pin from the inner side to the outer side, and
secure cross spring.
6. Install clips to the pad pins.
CAUTION:
If clip is not fully attached, pad pin or brake pad could fall out while vehicle is in motion.
7. Depress the brake pedal several times to check that no drag feel is present for the front disc brake. Refer to See: Procedures/Front Disc
Brake/Brake Pad (4 Piston Type) See: Brake Caliper/Service and Repair/Removal and Replacement/Front Disc Brake/Brake Caliper Assembly (1
Piston Type)/Exploded View
.
Exploded View
FRONT DISC BRAKE
BRAKE PAD (4 PISTON TYPE) BRAKE PAD (4 PISTON TYPE) : Exploded View
Exploded View
REAR DISC BRAKE
BRAKE PAD (FRONT CALIPER 1 PISTON TYPE) BRAKE PAD (FRONT CALIPER 1 PISTON TYPE) : Exploded View