infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Brakes - Judder/Vibration|Page 4213 > < Brakes - Front Brake Squeal/Squeak
Page 1
background image

Brake Pad: All Technical Service Bulletins
Brakes - Judder/Vibration

Classification:
BR09-002b

Reference:
ITB09-037b

Date:
January 28, 2010

G COUPE AND SEDAN; BRAKE JUDDER

This bulletin has been amended. CLAIMS INFORMATION has been corrected. The SERVICE PROCEDURE has been amended. Please discard all
previous copies.

APPLIED VEHICLES:
2007-2009 G Sedan (V36)
2008-2009 G Coupe (CV36)

APPLIED VINS:
2007-2008 G Sedan - ALL
2008 G Coupe - ALL
2009 G Coupe vehicles built between:
JNKCV(*)4(**)9M 600008 and JNKCV(*)4(**)9M 652073 
2009 G Sedan vehicles built between:
JNKCV(*)1(**)9M 010111 and JNKCV(*)1(**)9M 051571
or
JNKCV(*)1(**)9M 300016 and JNKCV(*)1(**)9M 353912

APPLIED DATES:

Vehicles built before: October 6, 2008

IF YOU CONFIRM:

While braking especially when braking at highway speeds:

^

the steering wheel shakes and/or

^

the body vibrates and/or

^

the brake pedal pulsates (also known as "Brake Judder")

IMPORTANT NOTES:

^

If incident occurs when cruising or coasting (not braking) it is not "Brake Judder" and may be tire/wheel related. Refer to ASIST for further
diagnostic assistance.

^

DO NOT CONFUSE "Brake Judder" with the rapid consistent-speed pedal pulsation that may be felt and only occurs when ABS is activated
during hard braking or on slippery road surfaces. In contrast the pedal pulsation of Brake Judder may occur with light to moderate braking
experienced during normal driving conditions and the pulsation rate will vary (faster or slower) with vehicle speed.

^

The purpose of "ACTIONS" is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service
Procedure as it contains information that is essential to successfully completing this repair.

ACTIONS:

1. Identify the brake system by NMC Model Code or visual inspection.

2. Remove the front brake caliper and rotor.

3. Install the new front brake backing plate (splash guard assembly).

4. Inspect the front brake rotor to determine if resurfacing is possible or if replacement is necessary.

Brakes - Judder/Vibration|Page 4213 > < Brakes - Front Brake Squeal/Squeak