Infiniti Workshop Service and Repair Manuals

INSTALLATION

CAUTION:
Do not reuse sensor rotor.

-

Follow the procedure below to install rear sensor rotor.

- Using a drifts, press rear sensor rotor onto side flange.

A: Drift [SST: ST30720000 (J-25405)]
B: Drift [SST: ST27863000 ( - )]
C: Drift [SST: KV40104710 ( - )]

- Install side flange. Refer to:

See: Transmission and Drivetrain/Differential Assembly/Service and Repair/Overhaul/Rear Final Drive R200/Exploded View (R200: 2WD models)
See: Transmission and Drivetrain/Differential Assembly/Service and Repair/Overhaul/Rear Final Drive R200/Exploded View R200 AWD models)
See: Transmission and Drivetrain/Differential Assembly/Service and Repair/Overhaul/Rear Final Drive R200V/M/T/Exploded View R200V: M/T
models
See: Transmission and Drivetrain/Differential Assembly/Service and Repair/Overhaul/Rear Final Drive R200V/A/T/Exploded View A/T R200V: A/T
models