G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
Refrigerant Pressure Sensor / Switch: Service and Repair
Removal And Installation
REFRIGERANT PRESSURE SENSOR
Removal and Installation
REMOVAL
1. Remove liquid tank. Refer to See: Condenser HVAC/Service and Repair/Condenser/Exploded View.
2. Fix the liquid tank (1) with a vise (A). Remove the refrigerant pressure sensor (2) with a wrench (B).
CAUTION:
Be careful not to damage liquid tank.
INSTALLATION
Installation is basically the reverse order of removal.
CAUTION:
-
Replace O-ring with new one. Then apply compressor oil to them when installing.
-
Check for leakages when recharging refrigerant.